Cord Draw Components Unique Features and Applications Traverse Cord mechanism Secure a Master Roller to Traverse Cord. As indicated in the figure, when the draw cord is pulled, the Master Roller pulls the curtain open. Master Roller Single Pulley Traverse Cord Rail Master Roller Double Pulley Tension Pulley Master Roller used to overlap curtains Dimensions of overlapping part New Delac Master Roller Right Master Roller Left Supertrac 81 mm (3.2") 96 mm (3.8") 82 mm (3.2") Master Roller Right Master Roller Left Theatrac 81 mm (3.2") 96 mm (3.8") 82 mm (3.2") Master Roller Master Roller 94 mm (3.7") 57 mm (2.2") 110 mm (4.3") 75 mm (3.0") *When a deeper overlap is required, overlap the rails. Pay attention to rail length *When installing a cord draw rail, the overall length is the length of the rail plus single pulley and double pulley (A + B) dimensions. Single Pulley A C Rail Rail length Double Pulley B D •Traverse Cord length Cut to the length equivalent to (Total rail length x 2) + (Installation height x 2) 500 mm/20". Products New Delac New Delac Skylight AB Pulley Supertrac Supertrac Cording for Curved Supertrac Skylight AB Pulley Theatrac Super Selfie Cord Draw A B C D 40 mm (1.6") 40 mm (1.6") 60 mm (2.4") 60 mm (2.4") 44 mm (1.7") 44 mm (1.7") 68 mm (2.7") 68 mm (2.7") 63 mm (2.5") 63 mm (2.5") 92 mm (3.6") 92 mm (3.6") 63 mm (2.5") 63 mm (2.5") 92 mm (3.6") 92 mm (3.6") 74 mm (2.9") 74 mm (2.9") 100 mm (3.9") 100 mm (3.9") – 42 mm (1.7") – 83 mm (3.3") 31 mm (1.2") 31 mm (1.2") 53 mm (2.0") 53 mm (2.0") * The Theatrac uses an inner type single pulley. 2 Assembling a Cord Draw rail (for opening curtains on both sides) Assembly diagram Double Pulley Rail Roller Single Pulley Master Roller Right Master Roller Left Tension Pulley 1 Threading the Traverse Cord Single Pulley Rail Double Pulley Traverse Cord Tension Pulley Master Roller Left Master Roller Right 1. Thread the cord as indicated in the figure. 2. Thread the cord through the cord band of the Master Roller Left. 3. Thread the cord through single and double pulleys as indicated in the figure. 4. Tie the Traverse Cord at the right Master Roller. 2 Assembly method Double Pulley Master Roller Right Single Pulley Roller Master Roller Left End Stop Rail Roller *Please pass the Traverse Cord through the position of the figure so as not to get entangled in the Master Roller and the Roller. Traverse Cord 1. Insert Rollers in the rail. 2. Secure single and double pulleys at each end with end stops. 3 Slack adjustment Single Pulley Master Roller Right Double Pulley Roller Master Roller Left Tension Pulley 1. Pull the Traverse Cord, and move Master Rollers toward each end. 2. Pull the left cord band of the Master Roller using the pliers, and hook the Traverse Cord as indicated in the figure.
Last ned PDF-fil